Subaru Legacy BN/BS (2015-2019) Service Manual: Removal

Subaru Legacy BN/BS (2015-2019) Service Manual / Manual transmission and differential(6mt) / Transfer driven gear / Removal

1. Remove the manual transmission assembly from the vehicle. Manual Transmission Assembly > REMOVAL

2. Remove the back-up light switch and the neutral position switch. Switches and Harness > REMOVAL

3. Remove the transfer case together with the extension case assembly. Transfer Case and Extension Case Assembly > REMOVAL

4. Remove the extension case assembly.

5. Remove the transfer driven gear and center differential as a unit.

6. Remove the taper roller bearing outer race.

(A)	Taper roller bearing (transfer case side) outer race
(B)	Taper roller bearing (extension case side) outer race

1. Using the ST, install the taper roller bearing (transfer case side).CAUTION:Do not apply a load in excess of 10 kN (1 ton, 1.1 US ton, 1.0 Imp ton).NOTE:Be careful when handling because the taper r ...

Other materials:

Procedure
NOTE:• During variator chain break-in, VDC warning light illuminate because of the difference between the vehicle speed value and G sensor value. This is not a malfunction. If the warning light illuminates, clear the VDC memory after the variator chain break-in is finished. Clear Memory Mode& ...