Subaru Legacy BN/BS (2015-2019) Service Manual: Removal
1. CROSSMEMBER AND CUSHION RUBBER 1. Disconnect the ground terminal from battery sensor. NOTE 2. Lift up the vehicle. 3. Remove the front under cover. Front Under Cover > REMOVAL 4. Remove the center exhaust pipe (rear). Center Exhaust Pipe > REMOVAL 5. Remove the center exhaust cover.
6. Set the transmission jack. CAUTION: Always support the transmission case with a transmission jack. 7. Remove the front crossmember and the rear crossmember.
8. Remove the transmission cushion rubber. |
Inspection
Check the following; repair or replace the faulty parts.1. CROSSMEMBER AND CUSHION RUBBERCheck the crossmember for bending or damage. Check that the cushion rubber does not have hardening, cracks or o ...
Other materials:
Steering warning light does not go off
DETECTING CONDITION:• Defective combination meter• Open circuit of harnessTROUBLE SYMPTOM:When starting the engine, the STEERING warning light continues to illuminate.STEPCHECKYESNO1.CHECK DTC.Read the DTC of the power steering control module using the Subaru Select Monitor. Read Diagno ...
