Subaru Legacy BN/BS (2015-2019) Service Manual: Removal
1. CAM SPROCKET RH NOTE: When replacing a single part, perform the work with the engine assembly installed to body. • Intake cam sprocket RH 1. Remove the chain cover. Chain Cover > REMOVAL 2. Remove the timing chain RH. Timing Chain Assembly > REMOVAL 3. Hold the intake cam sprocket RH using the ST1 and ST2, and remove the bolts using the ST3. CAUTION: Perform the operation carefully since the ST comes off easily.
4. Remove the intake cam sprocket RH. • Exhaust cam sprocket RH 1. Remove the chain cover. Chain Cover > REMOVAL 2. Remove the timing chain RH. Timing Chain Assembly > REMOVAL 3. Hold the exhaust cam sprocket RH using the ST1, ST2 and ST3, and remove the bolts using the ST4.
4. Remove the exhaust cam sprocket RH. 2. CAM SPROCKET LH NOTE: When replacing a single part, perform the work with the engine assembly installed to body. • Intake cam sprocket LH 1. Remove the chain cover. Chain Cover > REMOVAL 2. Remove the timing chain LH. Timing Chain Assembly > REMOVAL 3. Hold the intake cam sprocket LH using the ST1 and ST2, and remove the bolts using the ST3. CAUTION: Perform the operation carefully since the ST comes off easily.
4. Remove the intake cam sprocket LH. • Exhaust cam sprocket LH 1. Remove the chain cover. Chain Cover > REMOVAL 2. Remove the timing chain LH. Timing Chain Assembly > REMOVAL 3. Hold the exhaust cam sprocket LH using the ST1, ST2 and ST3, and remove the bolts using the ST4.
4. Remove the exhaust cam sprocket LH. |
Cam sprocket
...
Inspection
Check the cam sprocket teeth for abnormal wear and scratches. ...
Other materials:
Assembly
NOTE:After assembling, manually turn the pulley to check that the rotor rotates smoothly.1. Use the following procedures to install the rectifier.(1) Remove old silicone grease on the mating surface of rear cover and rectifier and apply new silicone grease.CAUTION:Do not apply silicone grease to the ...
