Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Removal

NOTE:

When replacing a single part, perform the work with the engine assembly installed to body.

1. When working on the vehicle

NOTE:

When working on the vehicle, perform the following steps also.

(1) Remove the air intake duct. Air Intake Duct > REMOVAL

2. Remove the V-belts. V-belt > REMOVAL

3. Use the ST to lock the crank pulley, and remove the crank pulley bolt.

NOTE:

To prevent damaging ST1, attach the ST2 onto the ST1 as shown.

ST1 18355AA000PULLEY WRENCH
ST2 18334AA000PULLEY WRENCH PIN SET

ST1 18355AA000PULLEY WRENCH
ST2 18334AA000PULLEY WRENCH PIN SET

4. Remove the crank pulley.

5. Remove the front oil seal from the chain cover.

Crank pulley
...

Inspection
1. Check that the crank pulley has no deformation, cracks or other damages.2. Inspect for oil leakage from the front oil seal. If there is an oil leak, replace the front oil seal with a new one. Cran ...

Other materials:

Removal
1. Remove the front tires.2. Remove the collector cover.(1) Carefully pull up the rear of collector cover at two positions (A).(2) Carefully pull up the front of collector cover at two positions (B) while moving it forward.3. Disconnect the ground terminal from battery sensor. NOTE4. Remove the air ...

© 2017-2024 Copyright www.sulegacy.com