Subaru Legacy BN/BS (2015-2019) Service Manual: Removal

Subaru Legacy BN/BS (2015-2019) Service Manual / Mechanical(h4do) / V-belt / Removal

NOTE:

When replacing a single part, perform the work with the engine assembly installed to body.

1. V-BELT

1. When working on the vehicle

NOTE:

When working on the vehicle, perform the following steps also.

(1) Remove the V-belt covers.

2. Attach the tool to the V-belt tensioner assembly, and rotate the tool clockwise to loosen and remove the V-belt.

2. V-BELT TENSIONER ASSEMBLY

1. Remove the V-belts. V-belt > REMOVAL

2. Remove the V-belt tensioner assembly.

3. IDLER PULLEY

1. Remove the V-belts. V-belt > REMOVAL

2. Remove the idler pulley.

1. Check the V-belt for cracks, tear or wear.2. Check the V-belt tensioner assembly and idler pulley for deformation, cracks or other damages.3. Check that the V-belt ribs are securely placed on the r ...

Other materials:

Dtc p0157 o2 sensor circuit low voltage bank 2 sensor 2
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.CAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.WIRING DIAGRAM:• Engine Electrical System ENGINE T ...