Subaru Legacy BN/BS (2015-2019) Service Manual: Removal
NOTE: To avoid mixing the timing chain component parts, separate each part after their removal. 1. Drain the engine oil. Engine Oil > REPLACEMENT 2. Remove the radiator. Radiator > REMOVAL 3. Remove the V-belts. V-belt > REMOVAL 4. Remove the crank pulley. Crank Pulley > REMOVAL 5. Remove the chain cover. Chain Cover > REMOVAL 6. Remove the chain tensioner (RH). NOTE: When removing chain tensioner (RH), hold the plunger by hand so that it does not come flying out.
7. Remove the chain guide (RH: between cams).
8. Remove the chain tensioner lever (RH).
9. Remove the chain guide (RH).
10. Remove the timing chain (RH). 11. Remove the chain tensioner (LH). NOTE: When removing chain tensioner (LH), hold the plunger by hand so that it does not come flying out.
12. Remove the chain guide (LH: between cams).
13. Remove the chain tensioner lever (LH).
14. Remove the chain guide (LH).
15. Remove the timing chain (LH). 16. Remove the chain tensioner (main). NOTE: When removing chain tensioner (main), hold the plunger by hand so that it does not come flying out.
17. Remove the chain guide (main).
18. Remove the chain tensioner lever (main).
19. Use the ST to lock the idler sprocket, and loosen the idler sprocket bolt.
20. Remove the idler sprocket bolts, and remove the idler sprocket and timing chain (main).
|
Installation
NOTE:• Be careful that the foreign matter is not into or onto the assembled component during installation.• Apply engine oil to all component parts of the timing chain.1. Prepare to attach ...
Other materials:
Dtc p0068 map/maf - throttle position correlation
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.CAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.STEPCHECKYESNO1.CHECK AIR INTAKE SYSTEM.Are there holes, ...
