CAUTION: Before handling the airbag system components, always refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION 1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE 2. Set the tire to the straight-ahead position. 3. Remove the driver’s airbag module. Driver’s Airbag Module > REMOVAL 4. Remove the steering wheel. CAUTION: • Always use the steering wheel puller for removal to avoid deforming the steering wheel. • If the steering wheel has been removed, make sure that the steering roll connector is not turned from the original position. Preparation tool: Steering wheel puller (1) Disconnect the connector and remove the nut. (2) Put an alignment mark (a) using a ruler as shown in the figure, and remove the steering wheel. |
Dtc p0605 internal control module read only memory (rom) error
NOTE:For the diagnostic procedure, refer to DTC P0606. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P0606 CONTROL MODULE PROCESSOR1. OUTLINE OF DIAGNOSISJudge as NG when SUM value of ROM is outside the standard value.2. EXECUTION CONDITIONSecondary ParametersExecution conditionNone ...