Subaru Legacy BN/BS (2015-2019) Service Manual: Removal
1. Disconnect the ground terminal from battery sensor. NOTE 2. Remove the trunk trim panel assembly - side (sedan model) or rear floor mat (OUTBACK model). • Sedan model: Trunk Room Trim > REMOVAL • OUTBACK model: Remove the rear floor mat and the spacer - rear floor mat.
3. Lift up the vehicle, and then remove the rear wheels. 4. Remove the bolts and nuts, and lower the lateral link assembly - rear. (1) Remove the nut and disconnect the rear stabilizer link. (2) Remove the bolts from the lower side of rear shock absorber assembly. (3) Disconnect the lateral link assembly - rear.
5. Remove the nut of shock mount - rear.
6. Remove the rear shock absorber assembly. |
Assembly
1. Before assembly, check each part. Rear Shock Absorber > INSPECTION2. Using a coil spring compressor, compress the coil spring - rear.CAUTION:When installing the coil spring compressor to the coil ...
Other materials:
Loading your vehicle
WARNING
Never allow passengers to ride on a
folded rear seatback, in the trunk or
in the cargo area. Doing so may
result in serious injury.
WARNING
Never stack luggage or other
cargo higher than the top of the
seatback because it could tumble
...
