Subaru Legacy BN/BS (2015-2019) Service Manual: Removal

Subaru Legacy BN/BS (2015-2019) Service Manual / Security and locks / Front door latch and door lock actuator assembly / Removal

1. Raise the glass assembly - front door to the top position.

2. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE

3. Remove the trim panel - front door. Door Trim > REMOVAL

4. Remove the sealing cover - front door. Front Sealing Cover > REMOVAL

5. Remove the rod clamp and remove the rod.

6. Remove the sash COMPL - lower.

(1) Remove the lower side of the running channel - front door.

(2) Remove the bolts, and remove the sash COMPL - lower.

7. Remove the screws to remove the latch & actuator assembly - front.

Front door latch and door lock actuator assembly

...

Inspection

1. LATCHCheck if the latch operates normally.If the cable or rod is faulty, replace the latch & actuator assembly - front.2. LOCK ACTUATOR1. Check door lock operationCheck the door lock operation when ...

Other materials:

Inspection
SymptomsInspection orderAll power windows do not operate.(1) Check the fuse.(2) Check the power window relay.(3) Check the wiring harness.Particular window does not operate.(1) Check the fuse.(2) Check the switch - power window main.(3) Check the switch - power window sub.(4) Check the power window ...