Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Removal

1. Open the front hood.

2. Remove the air intake duct. Air Intake Duct > REMOVAL

3. Remove the bumper face - front. Front Bumper > REMOVAL

4. Remove the bracket - grille.

5. Remove the radiator upper brackets.

6. Remove the lock assembly - front hood.

(1) Remove the nuts and clips, and push the radiator to the rear to pull out the lock assembly - front hood through the clearance.

(2) Disconnect the release cable, and detach the lock assembly - front hood.

NOTE:

When disconnecting the release cable, refer to “FRONT HOOD OPENER” of “Remote Openers”. Remote Openers > REMOVAL

Front hood lock assembly
...

Adjustment
1. Remove the bumper face - front. Front Bumper > REMOVALNOTE:Remove the bumper face - front only at the first adjustment.2. Remove the center ring clip from the lock assembly - front hood.NOTE:Remov ...

Other materials:

Dtc b14a5 refrigerant flow sensor circuit open
DTC DETECTING CONDITION:• The voltage of the refrigerant flow sensor signal line increased to 4.7 V or more.• Open circuit in refrigerant flow sensorTROUBLE SYMPTOM:A/C does not function because refrigerant flow amount cannot be measured.WIRING DIAGRAM:NOTE:For the coupling connector, re ...

© 2017-2024 Copyright www.sulegacy.com