1. Disconnect the ground terminal from battery sensor. NOTE 2. Remove the combination meter assembly. Combination Meter > REMOVAL 3. Remove the keyless access CM. (1) Remove the reinforcement - combination meter. NOTE: For model with navigation and model with telematics, remove the GPS antenna assembly. GPS Antenna > REMOVAL (2) Disconnect the connector and remove the bolt. |
Installation
1. Apply a coat of spray type lubricant to the mating area of cushion rubber.2. Install the rear exhaust pipe to cushion rubber.NOTE:After assembling, degrease the lubricant which was applied to the cushion rubber while removing/installing.3. Install the bolts and self-locking nuts which secure the ...