1. KEYLESS TRANSMITTER BATTERY CAUTION: To prevent static electricity damage to the keyless transmitter printed circuit board, touch the steel area of building with hand to discharge static electricity carried on body or clothes before disassembling the keyless transmitter. 1. Remove the keyless transmitter cover, and take out the transmitter case (A). NOTE: Use a flat tip screwdriver with protective tape or cloth in order not to damage the components. 2. Release the claws to open the transmitter case, then remove the battery (A). |
Dtc p2402 evap system leak detection pump control circuit high
DTC DETECTING CONDITION:Immediately at fault recognitionCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.WIRING DIAGRAM:• Engine Electrical System ENGINE TYPE FB (WITHOUT PUSH BUTTON ST ...