Subaru Legacy BN/BS (2015-2019) Service Manual: Removal

Subaru Legacy BN/BS (2015-2019) Service Manual / Security and locks / Rear gate latch and actuator assembly / Removal

1. Disconnect the ground terminal from battery sensor. NOTE

2. Remove the trim panel - rear gate. Rear Gate Trim > REMOVAL

3. Remove the latch and actuator - rear gate.

(1) Disconnect the connector.

(2) Remove the bolts, and remove the latch and actuator - rear gate.

Rear gate latch and actuator assembly

...

Inspection

1. LATCHCheck if the latch operates normally.If latch deformation, abnormal wear, or unsmooth lock operation is observed, replace the latch and actuator - rear gate.2. ACTUATORUnit inspectionPreparati ...

Other materials:

Caution
Before disconnecting connectors of sensors or units, be sure to disconnect the ground cable from battery. When replacing the electrical parts provided with memory functions that store contents specified by a customer, record the memory contents before disconnecting the battery ground cable.1. HFC-13 ...