1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE 2. Remove the cover assembly - instrument panel LWR driver. Instrument Panel Lower Cover > REMOVAL 3. Remove the trunk opener switch. (1) Release the claws and remove the trunk opener button (a). |
Dtc c1922 hill hold switch circuit
DTC DETECTING CONDITION:A fault is detected if the hill hold switch is pressed and held for a long period of time.TROUBLE SYMPTOM:Hill hold function cannot be set.WIRING DIAGRAM:NOTE:For the coupling connector, refer to “WIRING SYSTEM”.Parking brake / brake fluid level warning light syst ...