Subaru Legacy Service Manual: Removal

Subaru Legacy Service Manual / Intake (induction)(h4do) / Air intake boot / Removal

1. Remove the clip (A) from the air intake boot.

2. Loosen the clamp (B) securing the air cleaner case (rear) to the air intake boot.

3. Loosen the clamp (C) which secures the throttle body to the air intake boot.

4. Disconnect the PCV hose and remove the air intake boot.

Inspection

1. Check that the air intake boot has no deformation, cracks or other damages.2. Inspect that no foreign objects are mixed in the air intake boot. ...

Other materials:

Inspection
Wash all the disassembled parts clean, and examine them for wear, damage and other defects. Repair or replace the defective parts as necessary.1. Hypoid driven gear and drive pinion• If there is evidently an abnormal tooth contact, find out the cause and adjust until the teeth contact correctl ...