Subaru Legacy BN/BS (2015-2019) Service Manual: Removal

Subaru Legacy BN/BS (2015-2019) Service Manual / Starting charging systems(h4do) / Generator / Removal

1. Disconnect the ground terminal from battery sensor. NOTE

2. Remove the V-belts. V-belt > REMOVAL

3. Disconnect the connector (A) and terminal (B) from the generator, and remove the clip (C).

4. Remove the V-belt cover bracket.

5. Remove the generator from the generator bracket.

6. Remove the V-belt tensioner. V-belt > REMOVAL

7. Remove the generator bracket from the engine.

NOTE:After assembling, manually turn the pulley to check that the rotor rotates smoothly.1. Use the following procedures to install the rectifier.(1) Remove old silicone grease on the mating surface o ...

Other materials:

Removal
1. Remove the engine from vehicle. Engine Assembly > REMOVAL2. Remove the crank pulley. Crank Pulley > REMOVAL3. Remove the chain cover. Chain Cover > REMOVAL4. Remove the timing chain assembly. Timing Chain Assembly > REMOVAL5. Remove the cam sprocket. Cam Sprocket > REMOVAL6. Remove the crank ...