Subaru Legacy BN/BS (2015-2019) Service Manual: Removal
CAUTION: Do not remove except when the PCV hose is broken. 1. Remove the clip (A), and loosen the clamps (B) and (C) securing the air intake boot.
2. Remove the air intake boot from the air cleaner case (rear) and throttle body, and move it to the left side wheel apron.
3. Disconnect the PCV hose A from the intake manifold assembly and the PCV valve, and then remove the PCV hose A.
4. Remove the intake manifold assembly. Intake Manifold Assembly > REMOVAL 5. Remove the PCV hose B from the PCV connector.
|
Pcv hose
...
Inspection
Check that the PCV hose has no cracks, damage or loose part. ...
Other materials:
Dtc p0011 "a" camshaft position - timing over-advanced or system performance bank 1
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.TROUBLE SYMPTOM:• Engine stalls.• Improper idlingCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCE ...
