1. Remove the collector cover. (1) Carefully pull up the rear of collector cover at two positions (A). (2) Carefully pull up the front of collector cover at two positions (B) while moving it forward. 2. Disconnect the ground terminal from battery sensor. NOTE 3. Loosen the clamp (A) securing the air intake boot. 4. Remove the bolt (B) securing the air intake boot to the collector cover bracket. 5. Remove the air intake boot from the throttle body and the air cleaner case (rear), and move it to the left side wheel apron. 6. Disconnect the connector (A) and vacuum hose (B) from the purge control solenoid valve, and remove the purge control solenoid valve. |
System features
BSD/RCTA consists of the following functions.
To detect a vehicle in a blind spot on an
adjacent lane or a vehicle approaching at
high speed while driving the vehicle (Blind
Spot Detection)
To detect a vehicle approaching from
the right or left while reversing the vehicle
...