1. Disconnect the ground terminal from battery sensor. NOTE 2. Remove the rear gate trim. Rear Gate Trim > REMOVAL 3. Remove the arm assembly - rear wiper. (1) Remove the cover - rear wiper arm. (2) Remove the nut, and remove the arm assembly - rear wiper. 4. Remove the motor assembly - rear wiper. (1) Disconnect the harness connector of the motor assembly - rear wiper. (2) Remove the bolts, and remove the motor assembly - rear wiper. |
Dtc p2109 throttle/pedal position sensor "a" minimum stop performance
NOTE:For the diagnostic procedure, refer to DTC P2101. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P2101 THROTTLE ACTUATOR "A" CONTROL MOTOR CIRCUIT RANGE/PERFORMANCE1. OUTLINE OF DIAGNOSISJudge as NG when full close point learning cannot conducted or abnormal value is detected.2. ...