Subaru Legacy BN/BS (2015-2019) Service Manual: Removal
1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE 2. Remove the trim panel - front door. Door Trim > REMOVAL 3. Remove the sealing cover - front door. Front Sealing Cover > REMOVAL 4. Remove the front door inner pad (a). CAUTION: If it is removed with an excessive force, the panel assembly - front door may be deformed. Also, if the clip is damaged, replace it with a new clip.
5. Connect the ground terminal to battery sensor. NOTE 6. Remove the glass assembly - front door. (1) Connect the switch - power window and then turn the ignition switch to ON. (2) Operate the switch - power window to move the glass assembly - front door to the position where the mounting bolts can be seen. (3) Remove the mounting bolts from the glass assembly - front door.
(4) While tilting the glass, remove the glass assembly - front door. CAUTION: Avoid impact and damage to the glass assembly - front door.
7. Remove the glass - front door partition. (1) Remove the bolts and screws, and then remove the running channel - front door and the sash assembly - partition.
(2) Remove the glass - front door partition.
|
Front door glass
...
Installation
1. Install the glass - front door partition.2. Install the running channel - front door and the sash assembly - partition.CAUTION:Check that the running channel - front door is securely fixed to the p ...
Other materials:
Air conditioner control
The air conditioner operates only when
the engine is running.
Press the air conditioner button while the
fan is in operation to turn on the air
conditioner. When the air conditioner is
on, the "A/C" indicator light illuminates.
To turn off the air conditioner, press the
button again. The ...
