1. Disconnect the ground terminal from battery sensor. NOTE 2. Remove the trim panel - rear door. Door Trim > REMOVAL 3. Remove the sealing cover - rear door. 4. Remove the glass assembly - rear door. Rear Door Glass > REMOVAL 5. Remove the rear regulator and motor assembly. (1) Disconnect the connector of the motor - rear.
(2) Remove the bolts, and then remove the regulator and motor assembly - rear.
|
InspectionDoor open indicator
When any of the doors, the rear gate
(Outback) or the trunk lid (Legacy) is not
fully closed, the door open indicator
appears. This function is effective even if
the ignition switch is in the "LOCK"/"OFF"
or "ACC" position (all models) or the key is
removed from the ignition switch (models
wi ...