Subaru Legacy BN/BS (2015-2019) Service Manual: Removal
1. Disconnect the ground terminal from battery sensor. NOTE 2. Disconnect the rear defogger connector. 3. Remove the glass - rear window in the same procedure as for the glass - front window. Windshield Glass > REMOVAL |
Installation
1. Fabricate the cartridge nozzle tip as shown and set the sealant gun with the adhesive.(a)10 mm (0.39 in)(b)8 mm (0.31 in)(c)Sealant gun2. Smoothen and clean the adhesive surfaces of the glass - rea ...
Other materials:
Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Using the refrigerant recovery system, discharge refrigerant. Refrigerant Recovery Procedure > PROCEDURE3. Disconnect the hose - pressure suction and the pipe - evaporator cooling.CAUTION:Seal the disconnected hose, pipe and engaging pa ...
© 2017-2026 Copyright www.sulegacy.com
