1. NORMAL MIRROR TYPE CAUTION: Be careful not to damage the mirror surface and windshield glass. 1. Remove the TORX® bolt, and slide the mirror assembly - inner rearview to remove. Preparation tool: TORX® T20 2. If the mirror mounting is damaged, replace the windshield glass. 2. HOME LINK TYPE CAUTION: Be careful not to damage the mirror surface and windshield glass. 1. Disconnect the ground terminal from battery sensor. NOTE 2. Remove the rearview mirror. (1) Slide the upper section of the cover, and release the claws in the lower section, then remove the harness cover (a). (2) Disconnect the rearview mirror connector (b). CAUTION: Be careful not to pull the harness. (3) Remove the TORX® bolt, and then slide the rear view mirror to remove. Preparation tool: TORX® T20 3. If the mirror mounting is damaged, replace the windshield glass. |
Assembly
1. Install the forward clutch piston to forward clutch drum.NOTE:• Apply CVTF to the seal of forward clutch piston.• Insert it all the way to the end.2. Install the return spring.3. Install the forward clutch piston seal.NOTE:Apply CVTF to the sealing area of forward clutch piston seal.4 ...