1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE 2. Remove the trim panel - front door. Door Trim > REMOVAL 3. Remove the panel - power window main switch. Power Window Control Switch > REMOVAL 4. Release the claws, and then remove the switch - door mirror from the panel - power window main switch. |
Inspection
1. COMMUNICATION FOR INITIALIZING IMPOSSIBLEWhen communication with the radar sensor is impossibleDETECTING CONDITION:• Defective harness connector• Power supply circuit malfunction• Defective radar sensor• Defective CAN communication circuit• Defective Subaru Select Mo ...