Subaru Legacy BN/BS (2015-2019) Service Manual: Replacement
CAUTION: If the engine oil is spilt over exhaust pipe or the under cover, wipe it off with cloth to avoid emission of smoke or causing a fire. 1. Open the oil filler cap for quick draining of engine oil. 2. Lift up the vehicle. 3. Drain engine oil by loosening the drain plug. NOTE: Prepare the container for draining of engine oil.
4. After draining the engine oil, tighten the engine oil drain plug. NOTE: Use a new drain plug gasket. Tightening torque: 41.7 N·m (4.3 kgf-m, 30.8 ft-lb)
5. Lower the vehicle. 6. Select engine oil of adequate quality and viscosity and fill it through the chain cover to the “F” line on the oil level gauge. Make sure that the vehicle is parked on a level surface when checking oil level. Recommended oil: Refer to “SPECIFICATION” for recommended oil. General Description > SPECIFICATION Engine oil capacity: Refer to “SPECIFICATION” for engine oil capacity. General Description > SPECIFICATION 7. Close the oil filler cap. 8. Start the engine to circulate the oil in engine. 9. Stop the engine and pull out the oil level gauge again, and check both sides of the oil level gauge. Use a lower side to check the engine oil level. If necessary, add engine oil up to the “F” line on oil level gauge.
|
Engine oil
...
Inspection
CAUTION:If the engine oil is spilt over exhaust pipe or the under cover, wipe it off with cloth to avoid emission of smoke or causing a fire.1. Park the vehicle on a level surface.2. Remove the oil le ...
Other materials:
Certification for the BSD/RCTA
U.S.-spec. models
FCC ID: OAYSRR2A
CAUTION
FCC WARNING
Changes or modifications not expressly
approved by the party responsible
for compliance could void
the user's authority to operate the
equipment.
This device complies with part 15 of the
FCC Rules. Operatio ...
