While the select lever is shifted to the "R" position, the below functions of the Reverse Automatic Braking system can be set by operating the audio/navigation monitor.
1) ON setting key of Reverse Automatic
Braking When the ON setting key is shown, the corresponding setting is ON. Touch and hold the ON setting key to turn the setting OFF. When the OFF setting is shown, the corresponding setting is OFF. Touch and hold the OFF setting key to turn the setting ON. When the Reverse Automatic Braking system and/or the object detection warning beeping sounds are turned OFF, the following indicator(s) will illuminate.
1) RAB OFF indicator: illuminates when the
Reverse Automatic Braking system is
turned OFF. Each indicator will turn off when the corresponding function is turned ON. NOTE
Also, the following settings can be changed by operating the multi information display.
For details, refer to "RAB" . |
Dtc p0132 a/f / o2 sensor circuit high voltage bank 1 sensor 1
DTC DETECTING CONDITION:Immediately at fault recognitionCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.WIRING DIAGRAM:• Engine Electrical System ENGINE TYPE FB (WITHOUT PUSH BUTTON ST ...