Subaru Legacy BN/BS (2015-2019) Service Manual: Secondary pressure sensor

Disassembly

1. Remove the snap ring.2. Remove the retaining plate, drive plate, driven plate and dish plate.3. Set the ST1, ST2 and ST3 to intermediate case.ST1 18762AA001COMPRESSOR SPECIAL TOOLST2 18763AA0 ...

Removal

CAUTION:• Be sure to prevent water or oil from contacting the connector terminal of secondary pressure sensor. If adhesion occurs, replace with a new part.• When removing secondary pressur ...

Other materials:

Inspection mode procedure
It is possible to diagnose the DTC by performing the indicated inspection mode. After correcting the DTC, perform a necessary inspection mode and make sure that the function is resumed correctly and the DTC is recorded.1. INSPECTION MODE 1DTCItemNoteB1010BODY CONTROL SYSTEM (BIU) MALFUNCTION — B10 ...