Subaru Legacy BN/BS (2015-2019) Service Manual: Specification

Subaru Legacy BN/BS (2015-2019) Service Manual / Instrumentation driver info / General description / Specification

1. COMBINATION METER ASSEMBLY

NOTE:

Specifications of the combination meter vary depending on the market and the grade.

Meter, display	Operation method, display method	Drive control	When checking the indicator needle operation/needle reading operation
Speedometer	Stepping motor type	Combination meter	—
Tachometer
Engine coolant temperature gauge
Fuel gauge
ABS warning light	LED	Combination meter	On/Off
STEERING warning light
AT oil temperature warning light
Driver’s seat belt warning light
Tire pressure warning light
AWD warning light
Hill hold ON indicator light
VDC warning light / VDC operation indicator light
VDC OFF indicator light
High beam indicator light
Front fog light indicator light
Lighting indicator light
Malfunction indicator light
Airbag warning light
Lane departure warning OFF indicator light
Pre-collision brake OFF indicator light
Parking brake operation indicator light
Meter illumination back light			Light ON
TFT back-up light			Light ON
Fuel level warning light			On/Off (area near the E mark is illuminated)
Oil pressure warning light		Oil pressure switch	Turns on or off according to module control
Charge warning light		Generator
Turn signal indicator light		Body integrated unit
Security/immobilizer indicator light		Body integrated unit
Auto leveler warning light		Auto headlight beam leveler CM
EPB warning light/brake fluid level warning light		Combination meter/brake fluid level switch	On/Off
ODO indicator	TFT	Combination meter	—
Trip indicator
ECO gauge
Select lever / shift position indicator
Information (intervention) display
Warning and indicator display • Door partially latched • Engine oil level • BSD/RCTA • BSD/RCTA OFF • SRF OFF • Washer fluid level • Hill descent control • Low ambient temperature
Cruise control system indicator • Constant speed cruise • SET • Set speed
EyeSight system indicator • Adaptive cruise • SET • READY • EyeSight warning • EyeSight temporary stop • OFF • HOLD • Preceding vehicle • Following distance setting • Set speed • Lane keep

2. WARNING BOX

Display	Display method
Passenger’s airbag ON indicator light	LED
Passenger’s airbag OFF indicator light
Passenger’s seat belt warning light

Caution

• Before disconnecting connectors of sensors or units, be sure to disconnect the ground cable from battery. When replacing the electrical parts provided with memory functions that store contents ...

Other materials:

Removal
1. Remove the collector cover.(1) Carefully pull up the rear of collector cover at two positions (A).(2) Carefully pull up the front of collector cover at two positions (B) while moving it forward.2. Disconnect the ground terminal from battery sensor. NOTE3. Disconnect the connector (A) from the oi ...