1. SEDAN MODEL
2. OUTBACK MODEL
NOTE: • Front toe-in, rear toe-in and front camber can be adjusted. Adjust if the value of toe-in or camber exceeds the tolerance range of the specification chart. • Other items except for front toe-in, rear toe-in and front camber that are described in the specification chart cannot be adjusted. • If other items exceed the tolerance range of the specification chart, check the suspension parts and connections for deformation. If defective, replace with new parts. A − B = Positive: Toe-in, Negative: Toe-out α = Individual toe angles |
Installation
CAUTION:Be sure to prevent water or oil from contacting the connector terminal of primary speed sensor. If adhesion occurs, replace with a new part.1. Install the primary speed sensor.NOTE:• Use new O-rings.• Apply CVTF to the O-rings.Tightening torque:5 N·m (0.5 kgf-m, 3.7 ft-lb) ...