Subaru Legacy BN/BS (2015-2019) Service Manual: Specification
1. CONDITIONS FOR COMPLETION OF ABS SEQUENCE CONTROL When the following conditions develop, the ABS sequence control stops and ABS operation is returned to the normal control mode. • When the speed of at least one wheel reaches 10 km/h (6.2 MPH). • When the brake pedal is released during ABS sequence control and the switch - stop light becomes OFF. • After completion of ABS sequence control. • When a malfunction is detected. |
Operation
1. While the ABS sequence control is being performed, the operation of the hydraulic unit can be checked using the brake tester or pressure gauge after the hydraulic unit solenoid valve operation.2. A ...
Other materials:
Dtc b1401 meter collation
DIAGNOSIS START CONDITION:• Battery voltage is 10 V or more.• The remote engine starter was not used to start the engine.DTC DETECTING CONDITION:Reference code incompatibility between combination meter and body integrated unitTROUBLE SYMPTOM:• Engine will not start.• The secu ...
© 2017-2024 Copyright www.sulegacy.com
