Subaru Legacy BN/BS (2015-2019) Service Manual: Specification

Subaru Legacy BN/BS (2015-2019) Service Manual / Vehicle dynamics control (vdc) / Brake lamp relay / Specification

1. CONDITIONS TO COMPLETE BRAKE LAMP LIGHTING OPERATION MODE

When the following conditions develop, the brake lamp lighting operation mode stops and the normal control mode is restored.

• When the speed of at least one wheel reaches 4 km/h (2 MPH).

• When brake lamp lighting operation mode ends.

• When a malfunction is detected.

Note

For brake light relay, refer to “Relay and Fuse”. Relay and Fuse ...

Other materials:

Adjustment
1. Select the appropriate reverse idler gear bushing from the table below, and adjust until the clearance between the reverse idler gear and reverse idler gear washer is within specification.Clearance (a):0.1 — 0.3 mm (0.004 — 0.012 in)Reverse idler gear bushingPart No.Length mm (in)Groove for i ...