Subaru Legacy BN/BS (2015-2019) Service Manual: Starter

Disassembly

1. Remove the cap from the generator.2. Remove four bolts.3. Use a drier to heat the rear cover (A) portion to 50 — 60°C (122 — 140°F).4. Insert a flat tip screwdriver or similar too ...

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the clip (A), and loosen the clamps (B) and (C) securing the air intake boot.3. Remove the air intake boot from the air cleaner ca ...

Other materials:

Airbag connector procedure
1. POWER SUPPLY1. How to disconnect:CAUTION:When pulling the slide lock or disconnecting connector, be sure to hold the connector, not the harness.(1) Pull the slide lock (a) in the direction of arrow.(2) With the slide lock pulled, disconnect the connector.2. How to connect:CAUTION:Be sure to inser ...