Subaru Legacy BN/BS (2015-2019) Owners Manual: Starting engine

Subaru Legacy BN/BS (2015-2019) Owners Manual / In case of emergency / Access key - if access key does not operate properly / Starting engine

Apply the parking brake.
Shift the select lever into the "P" position.
Depress the brake pedal.

Starting engine

Hold the access key with the buttons facing you, and touch the push-button ignition switch with it.
When the communication between the access key and the vehicle is completed, a chime (ding) will sound. At the same time, the push-button ignition switch turns to the "ACC" or "ON" position.
After the push-button ignition switch turns to the "ACC" or "ON" position, while depressing the brake pedal, press the push-button ignition switch.

NOTE If the engine does not start even though the above procedure was followed precisely, contact your SUBARU dealer

Switching power status

Apply the parking brake. Shift the select lever into the "P" position. Depress the brake pedal. Hold the access key with the buttons facing you, and touch the push-but ...

Trunk lid (Legacy) - if the trunk lid cannot be opened

NOTE If you open the trunk lid with a key while the alarm system is armed, the alarm system is triggered and the vehicle's horn sounds. In this case, perform any of the following operations. ...

Other materials:

Removal
WARNING:Place “NO OPEN FLAMES” signs near the working area.1. PULSATION DAMPER RH1. Remove the collector cover.(1) Carefully pull up the rear of collector cover at two positions (A).(2) Carefully pull up the front of collector cover at two positions (B) while moving it forward.2. Release ...