Subaru Legacy BN/BS (2015-2019) Owners Manual: Steering lock
After stopping the engine and the driver's door is open, the steering wheel will be locked due to the steering lock function. When the engine is restarted, the steering lock will be automatically canceled When the steering lock cannot be released
1) Operation indicator When you cannot restart the engine due to the steering lock, check the status of operation indicator and perform the following steps. Operation indicator flashing in green
Operation indicator flashing in orange There may be a malfunction in the steering lock function. Immediately contact your nearest SUBARU dealer. |
Stopping engine
Stop the vehicle completely.
Move the select lever to the "P"
position.
Press the push-button ignition switch.
The engine will stop, and the power will be
switched off
...
Remote engine start system (dealer
option)
WARNING
There are some general precautions
when starting the engine.
Carefully read the precautions
described in "General precautions
when starting/stopping engine"
...
Other materials:
Dtc b14a8 compressor break-in malfunction low refrigerant
DTC DETECTING CONDITION:• Compressor was operated while refrigerant was low.• Compressor was operated while refrigerant pressure was extremely low.• Judgment is made only when the delivery mode fuse is installed.TROUBLE SYMPTOM:A/C does not operate.WIRING DIAGRAM:NOTE:For the coupl ...
