Subaru Legacy BN/BS (2015-2019) Service Manual: Subaru select monitor

Steering warning light does not come on

1. POWER STEERING ASSIST ENABLEDDETECTING CONDITION:• Defective combination meter• Defective harnessTROUBLE SYMPTOM:When the ignition switch is turned to ON (engine OFF), the STEERING warn ...

Operation

1. HOW TO USE SUBARU SELECT MONITORFor detailed operation procedures, refer to “Application help”.2. READ CURRENT DATA1. On «Start» display, select «Diagnosis».2. On «Vehicle selectio ...

Other materials:

Installation
CAUTION:Be sure to prevent water or oil from contacting the connector terminal of secondary speed sensor. If adhesion occurs, replace with a new part.1. Install the secondary speed sensor.NOTE:• Use new O-rings.• Apply CVTF to the O-rings.Tightening torque:5 N·m (0.5 kgf-m, 3.7 ft ...