1. On «Start» display, select «Diagnosis». 2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed». 3. On «Main Menu» display, select «Each System». 4. On «Select System» display, select «Keyless Access with Push Button Start» and then select «Enter». 5. On «Select Function» display, select «Active Test». 6. Select a location to be inspected.
*1: When lit by a condition other than for a system operation check mode, it will not become unlit even when set to OFF or no output. *2: When performed with ignition switch ON, engine will start. Therefore, great care must be exercised. NOTE: For detailed operation procedures, refer to “Application help”. |
Removal
NOTE:Always replace primary pulley and secondary pulley as an assembly because they are non-disassembled parts.1. Remove the transmission assembly from the vehicle. Automatic Transmission Assembly > REMOVAL2. Remove the air breather hose. Air Breather Hose > REMOVAL3. Remove the oil pan and contro ...