Subaru Legacy Service Manual: Thermostat

Installation

1. Install the bolts securing the reservoir tank to the radiator fan shroud.Tightening torque:7.5 N·m (0.8 kgf-m, 5.5 ft-lb)2. Insert the over flow hose (A) connected to the radiator filler nec ...

Removal

1. ENGINE SIDE1. Disconnect the ground terminal from battery sensor. NOTE2. Drain engine coolant. Engine Coolant > REPLACEMENT3. Remove the front exhaust pipe. Front Exhaust Pipe > REMOVAL4. Discon ...

Other materials:

Removal
1. Remove the collector cover.(1) Carefully pull up the rear of collector cover at two positions (A).(2) Carefully pull up the front of collector cover at two positions (B) while moving it forward.2. Disconnect the ground terminal from battery sensor. NOTE3. Remove the air intake duct. Air Intake ...