Subaru Legacy BN/BS (2015-2019) Service Manual: Throttle body

Installation

CAUTION:If lubricant is spilt over the exhaust pipe, wipe it off with cloth to avoid emission of smoke or causing a fire.1. Before installing rear oxygen sensor, apply the anti-seize compound only to ...

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Drain approximately 3.0 L (3.2 US qt, 2.6 Imp qt) of coolant. Engine Coolant > REPLACEMENT3. Remove the clip (A), and loosen the clamps ...

Other materials:

Procedure
1. PREPARATION FOR LEARNING1. Warm up or cool down until the ATF temperature displayed on the Subaru Select Monitor is 40 — 65°C (104 — 149°F).2. After stopping the vehicle, shift the select lever to “P” range.3. Apply the electronic parking brake.4. Lift up the vehicle ...