Subaru Legacy BN/BS (2015-2019) Service Manual: Transmission gear oil
1. Wipe off grease, oil and dust on the mating surfaces of transmission cases with cleaning solvent.2. Install the shifter fork and rod. Shifter Fork and Rod > INSTALLATION3. Install the reverse idle ...
1. Pull out the oil level gauge.2. Lift up the vehicle.3. Using the TORX® bit T70, remove the drain plug, and drain the transmission gear oil completely.CAUTION:• Immediately after the vehicle ...
Other materials:
Installation
1. Install the intake manifold assembly onto cylinder head.NOTE:• Use a new gasket.• Be careful not to let the engine harness be caught by the parts.Tightening torque:25 N·m (2.5 kgf-m, 18.4 ft-lb)2. Connect the fuel delivery tube and evaporation hose.(1) Connect the evaporation h ...