Subaru Legacy BN/BS (2015-2019) Service Manual: Transmission harness

Installation

1. Install the TCM.Tightening torque:7.5 N·m (0.8 kgf-m, 5.5 ft-lb)2. Install the harness connector to TCM.NOTE:• Install the connector in the reverse order of removal.• Move the lo ...

Removal

1. Remove the transmission from the vehicle. Automatic Transmission Assembly > REMOVAL2. Prepare for overhaul. Preparation for Overhaul3. Remove the transmission harness ground terminal and remove t ...

Other materials:

General diagnostic table inspection
Trouble and possible causeCorrective action1. Insufficient braking(1) Fluid leakage from the hydraulic mechanismRepair or replace. (cup, piston seal, piston boot, master cylinder piston kit, pipe or hose)(2) Entry of air into the hydraulic mechanismBleed air.(3) Wear, deteriorated surface material, ...