Subaru Legacy BN/BS (2015-2019) Service Manual: Transmission mounting system

Installation

1. Clean the mating surface of valve cover and transmission side.2. Check the control valve body for dust and other foreign matter.3. Install the O-rings.NOTE:• Use new O-rings.• Apply CVT ...

Removal

1. TRANSMISSION REAR CROSSMEMBER AND REAR CUSHION RUBBER1. Disconnect the ground terminal from battery sensor. NOTE2. Lift up the vehicle.3. Remove the center exhaust pipe. Center Exhaust Pipe > REM ...

Other materials:

Outback
Apply a flat-head screwdriver to the light cover as shown in the illustration, and pry the light cover off from the rear gate trim. Turn the bulb socket counterclockwise and remove it. Pull the bulb out of the bulb socket and replace it with a new one.  Install ...