Subaru Legacy BN/BS (2015-2019) Owners Manual: Treadwear
The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half (1- 1/2) times as well on the government course as a tire graded 100. The relative performance of tires depends upon the actual conditions of their use, however, and may depart significantly from the norm due to variations in driving habits, service practices and differences in road characteristics and climate. |
Uniform tire quality grading standards
This information indicates the relative
performance of passenger car
tires in the area of treadwear,
traction, and temperature resistance.
This is to aid the consumer
in making an informed choi ...
Traction AA, A, B, C
The traction grades, from highest to
lowest, are AA, A, B and C. Those
grades represent the tire's ability to
stop on wet pavement as measured
under controlled conditions on specified
government ...
Other materials:
Installation
1. Select shims for pulley alignment. Primary Pulley and Secondary Pulley > ADJUSTMENT2. Install the seal ring to the input shaft.NOTE:• Use new seal rings.• When installing the seal rings, do not expand the seal rings too much.• Apply CVTF to the seal rings.3. Install the seal ri ...
