Subaru Legacy BN/BS (2015-2019) Service Manual: Turbine speed sensor

Installation

1. TRANSMISSION REAR CROSSMEMBER AND REAR CUSHION RUBBER1. Attach the rear cushion rubber to the transmission.Tightening torque:40 N·m (4.1 kgf-m, 29.5 ft-lb)2. Install the crossmember.Tighteni ...

Removal

CAUTION:Be sure to prevent water or oil from contacting the connector terminal of turbine speed sensor. If adhesion occurs, replace with a new part.1. Disconnect the ground terminal from battery senso ...

Other materials:

Inspection
1. CAMSHAFT POSITION SENSOR1. Disconnect the ground terminal from battery sensor. NOTE2. Prepare an oscilloscope.3. While pressing the section (A) shown in the figure, move the lock lever (B) in the direction of the arrow to disconnect the connectors from the ECM in numerical order as shown in the ...