Subaru Legacy BN/BS (2015-2019) Owners Manual: Unlocking

Subaru Legacy BN/BS (2015-2019) Owners Manual / Keys and doors / PIN Code Access (models with "keyless access with push-button start system") / Unlocking

Perform steps 1 to 5 described in "Registration".

NOTE

You cannot unlock by PIN Code Access in the following cases.

when the access key is within the operating ranges
when the ignition switch is in the "ACC" or "ON" position

If you make an operation error during the unlocking procedure, start over with the unlocking procedure after waiting for 5 seconds or longer.
To protect your vehicle from theft, a buzzer will sound if incorrect PIN codes are entered five times continuously. If this occurs, you cannot unlock the doors by PIN Code Access for 5 minutes.

Registering a PIN code

Preparation Turn off the ignition switch. Close all doors (including trunk/rear gate). Press and hold the " " button on the access key. Then all doors (including rear gate ...

Remote keyless entry system

CAUTION Do not expose the remote transmitter to severe shocks, such as those experienced as a result of dropping or throwing. Do not take the remote transmitter ...

Other materials:

Inspection
1. Check that the fuel level sensor has no damage.2. Measure the fuel level sensor float position.NOTE:When inspecting the fuel level sensor, perform the work with the sensor installed to the fuel pump.(1)FULL(2)EMPTY(3)Fuel tank seating surfaceFloat positionStandardFULL to Fuel tank seating surface ...