Subaru Legacy BN/BS (2015-2019) Service Manual: Variator chain

Installation

1. Install the rear cushion rubber on the transmission.Tightening torque:40 N·m (4.1 kgf-m, 29.5 ft-lb)2. Install the transmission rear crossmember.Tightening torque:T1: 35 N·m (3.6 kgf- ...

Removal

For removal of variator chain, refer to “Primary Pulley and Secondary Pulley”. Primary Pulley and Secondary Pulley > REMOVAL ...

Other materials:

Replacement
1. Pull out the oil level gauge.2. Lift up the vehicle.3. Using the TORX® bit T70, remove the drain plug, and drain the transmission gear oil completely.CAUTION:• Immediately after the vehicle has been running or after idling for a long time, the gear oil will be hot. Be careful not to receiv ...