Subaru Legacy BN/BS (2015-2019) Owners Manual: Vehicle Dynamics Control operation
indicator light
The indicator light flashes during activation
of the skid suppression function and
during activation of the traction control
function.
NOTE
- The light may remain illuminated for
a short period of time after the engine
has been started, especially in cold
weather. This does not indicate the
existence of a problem. The light
should turn off as soon as the engine
has warmed up.
- The indicator light illuminates when
the engine has developed a problem
and the CHECK ENGINE warning light/
malfunction indicator light is on.
The Vehicle Dynamics Control system is
probably malfunctioning under the following
condition. Have your vehicle checked
at a SUBARU dealer as soon as possible.
- The light does not turn off even after
the lapse of several minutes (the engine
has warmed up) after the engine has
started.
|
CAUTION
The Vehicle Dynamics Control system
provides its ABS control
through the electrical circuit of the
ABS. Accordingly, if the ABS is
inoperative, the Vehicle Dynamics
Co ...
The light illuminates when the Vehicle
Dynamics Control OFF switch is pressed
to deactivate the Vehicle Dynamics Control
system.
The Vehicle Dynamics Control system is
probably malfunctioning u ...
Other materials:
Dtc u0428 invalid data received from steering angle sensor module
DTC DETECTING CONDITION:Defective data was transmitted from steering angle sensor.TROUBLE SYMPTOM:VDC CM does not operate normally.STEPCHECKYESNO1.CHECK PERFORMING OF BASIC DIAGNOSTIC PROCEDURE.Was the basic diagnostic procedure performed up to STEP 8- Diagnostic Procedure with Diagnostic Trouble Co ...