Subaru Legacy BN/BS (2015-2019) Service Manual: Diagnostic procedure with diagnostic trouble code (dtc)
Subaru Legacy BN/BS (2015-2019) Service Manual / Combination meter (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc)
- Dtc u1433 invalid data received from eyesight
- Dtc u0100 lost communication with ecm/pcm "a"
- Dtc u1235 lost communication with eyesight
- Dtc u0073 control module communication bus off
- Dtc b1507 external air temperature open/short-circuit detection
- Dtc b1500 fuel sender open/short-circuit detection
- Dtc u0327 software incompatibility with vehicle security control module
- Dtc u0181 lost communication with headlamp leveling control module
- Dtc b1502 warning box communication malfunction
- Dtc u0151 lost communication with restraints control module
- Dtc u0140 lost communication with body control module
- Dtc u0131 lost communication with power steering control module
- Dtc u0128 lost communication with park brake control module
- Dtc u0122 lost communication with vehicle dynamics control module
- Dtc u1232 lost communication with rear/side radar control module
- Dtc u0162 lost communication with audio visual navigation display module
- Dtc u0101 lost communication with tcm
Read diagnostic trouble code (dtc) operation
1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».3. On «Main Menu» display, select «Each System».4. ...
Dtc u1433 invalid data received from eyesight
Detected when CAN data from the stereo camera does not arrive.NOTE:Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE ...
Other materials:
Adjustment
1. Loosen the lock nut of the clutch start switch.2. Fully depress the clutch pedal and hold it.3. Adjust the gap (A) of the clutch pedal plate and the clutch start switch to be 2.9 mm (0.11 in).(A)2.9 mm (0.11 in)(B)Clutch pedal plate(C)Clutch start switch(D)Lock nut4. Tighten the lock nut.Tighteni ...
© 2017-2024 Copyright www.sulegacy.com
