Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc u0128 lost communication with park brake control module

Subaru Legacy BN/BS (2015-2019) Service Manual / Combination meter (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc u0128 lost communication with park brake control module

Detected when CAN data from VDC CM does not arrive.

NOTE:

Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE

Dtc u0131 lost communication with power steering control module

Detected when CAN data is not received from electric power steering CM.NOTE:Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE ...

Dtc u0122 lost communication with vehicle dynamics control module

Detected when CAN data from VDC does not arrive.NOTE:Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE ...

Other materials:

Assembly
1. Install the tie-rod into rack.Tightening torque:90 N·m (9.2 kgf-m, 66.4 ft-lb)NOTE:Check the mating face of rack and tie-rod for foreign matter such as dust etc.2. Apply a coat of grease to the tie-rod groove, and then install the boot - steering gearbox to the housing.CAUTION:Assemble the ...