Honda Civic manuals

Subaru Legacy Service Manual: Dtc p013f o2 sensor delayed response - lean to rich bank 1 sensor 2

Subaru Legacy Service Manual / Engine (diagnostics)(h6do) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc p013f o2 sensor delayed response - lean to rich bank 1 sensor 2

NOTE:

For the diagnostic procedure, refer to DTC P013A. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P013A O2 SENSOR SLOW RESPONSE - RICH TO LEAN BANK 1 SENSOR 2

1. OUTLINE OF DIAGNOSIS

Detect the delayed response of rear oxygen sensor output for lean > rich.

After the deceleration fuel cut has completed, detect the trouble by calculating the time when the rear oxygen sensor output increases to the predetermined voltages.

Judge as NG when the response time is larger than the threshold value.

2. COMPONENT DESCRIPTION

(A)

Electromotive force

(B)

Air fuel ratio

(C)

Lean

(D)

Rich

(E)

Theoretical air fuel ratio

(F)

Comparative voltage

(1)

Atmosphere

(2)

Exhaust gas

(3)

Electromotive force

3. EXECUTION CONDITION

Secondary Parameters

Execution condition

Battery voltage

> 10.9 V

Front oxygen (A/F) sensor closed loop control

Operation

Rear oxygen sensor voltage when fuel cut has completed

< 0.15 V

Estimated element temperature of rear oxygen sensor when fuel cut has completed

≥ 500 °C (932 °F)

Fuel cut time

≥ 5000 ms

4. GENERAL DRIVING CYCLE

Perform diagnosis only once when recovering from the deceleration fuel cut continued for more than predetermined time with the rear oxygen sensor warmed up sufficiently.

5. DIAGNOSTIC METHOD

Detect the trouble by calculating the time from the completion of the fuel cut to the beginning of the rear oxygen sensor voltage starting to rise.

(A)

0.3 V

(B)

0 V

(C)

Diagnostic parameter

(D)

Normal

(E)

Malfunction

Judge as NG when the following conditions are established.

Judgment Value

Malfunction Criteria

Threshold Value

Time needed for the rear oxygen sensor voltage to change up to 0.3 V after the fuel cut was deactivated

> 3750 time(s) - 32 ms

Time Needed for Diagnosis: 3750 time(s) - 32 ms

Malfunction Indicator Light Illumination: Illuminates when malfunction occurs in 2 continuous driving cycles.

Dtc p0141 o2 sensor heater circuit bank 1 sensor 2
NOTE:Refer to DTC P0037 for diagnostic procedure. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P0037 A/F / O2 HEATER CONTROL CIRCUIT LOW BANK 1 SENSOR 21. OUTLINE OF DIAGNOSISDetect ...

Dtc p013e o2 sensor delayed response - rich to lean bank 1 sensor 2
NOTE:For the diagnostic procedure, refer to DTC P013A. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P013A O2 SENSOR SLOW RESPONSE - RICH TO LEAN BANK 1 SENSOR 21. OUTLINE OF DIAGNOSI ...

Other materials:

Inspection
1. Check that the manifold absolute pressure sensor has no deformation, cracks or other damages.2. Connect dry-cell battery positive terminal to terminal No. 3 and dry-cell battery ground terminal to terminal No. 2, circuit tester ground terminal to terminal No. 2 and the circuit tester positive ter ...

© 2017-2019 Copyright www.sulegacy.com