Subaru Legacy BN/BS (2015-2019) Service Manual: Front arm

Installation

CAUTION:Use a new bolt and self-locking nut. For parts which are not reusable, refer to “COMPONENT”. General Description > COMPONENT1. Install the cradle to the vehicle body.(1) Raise the ...

Removal

1. Lift up the vehicle, and then remove the front wheels.2. Remove the under cover - front. Front Under Cover > REMOVAL3. Remove the front arm.(1) Pull out the cotter pin (a).(2) Remove the castle nu ...

Other materials:

Installation
1. Install the stop light switch onto the bracket with screws and position it with the nut.2. Adjust the stop light switch position, and then tighten the nut. Stop Light Switch > ADJUSTMENTTightening torque:8 N·m (0.8 kgf-m, 5.9 ft-lb)3. Install the panel - knee guard.Tightening torque:7 N&m ...